OUTPUT

Output Voltage

12V DC

Output Voltage Range

12V DC士0.5V DC

Output Current

Max 10A

Output Power

Max 120w

Output Power Range

0-120w

Ripple & Noise

≤120mv

Linear Regulation

土1%

Load Regulation

土1%

Start-up Time

500 ms/230VAc 800ms/115VAC

Hold Up Time

100 ms/230VAc 100 ms/115VAC

INPUT

Input Voltage

100V-264VAC

Frequency

50/60Hz

Input Current

1.2A ~0.48A

Power Factor

PF>0.7

No-Load Power Consumption

<3w

Efficiency

89%

Inrush current

Cold Start 60A  AT 230VAC

Control Surge Capability

L.N:2KV L.N-PE:4KV

Leakage Current

Max 0.5mA

ENVIRONMENT

Working Temperature

ta :-30°C-50°C tc: 80°c

Working Humidity

20 ~ 99%RH,Condensing(Waterproof)

Storage Temp, Humidity

-40 C ~ 80 C, 10~95%RH

PROTECTION

Overtemperature

Protection type:Turn off the output voltage, after the temperature drops, re-energize to restore.

Overload protection

Shut down the output when current load ≥110%-150%, auto recovers.

Short Circuit Protection

Protection type: It can be automatically restored after the fault is eliminated.

SAFETY&EMC

Withstand Voltage

I/P-O/P:3750VAC

Isolation Resistance

I/P-O/P: 100MΩ/500VDC/25°C/70%RH

Safety standards

IEC/EN61347；IEC/EN60950；IP67

EMC Test Standards

EN55015:2013；EN61547:2009；

EN61000-3-2:2014; EN61000-3-3:2013

Reliability and

Quality Control

Impact aging

100% of the product is fully loaded and impacted for 4 hours under an environment of at least 40°C±5°C

Component Derating

Under the steady-state conditions of rated input and output, the stress of components will not exceed its maximum nominal value

NOTE

1. All parameters not specifically mentioned are measured at 230VAC input, rated load and 25°C ambient temperature.

2. Ripple and noise test method: connect 0.1uF and 47uF capacitors in parallel at the terminal, and measure under 20MHZ bandwidth.

3. Ensure that the power supply is used under the rated parameters and environment.